E-Shop

Ador MIG Welder -Mig Welding Machine -CHAMPMIG 250

Ask For Price

OMNIMIG 250

 

The new Inverter based Compact MIG Welder

SALIENT FEATURES

  • Latest Inverter based technology.
  • Low Power Consumption due to Power Factor Correction Technique that brings the Power Factor nearly equal to one.
  • Single point controlled synergic MIG welding operation.
  • 3-digit Digital Panel Meters to display the set voltage, actual voltage, set current and actual current while welding.
  • LED Indications for Mains ON and Trip signal.
  • Protections: Over-Voltage, Under -Voltage, Over- Temperature & Output Short Circuit Protection.
  • Compact Design with built-in Wirefeeder.
  • Gas Trolley for easy movement of machine on the shop floor.

 

 

TECHNICAL SPECIFICATIONS – POWER SOURCE

 

Technical  Specifications

Unit

OMNIMIG

Input
Input Supply :
Voltage

Volts, Ac

230 V +15%, -10%,

Phase

1

Frequency

HZ

50/ 60

Input Power @ 230VAC in MIG  Mode

CC – CV

@100% duty cycle

KVA

4.6 Max.

@ 60% duty cycle

KVA

6.5 Max.

@ 35% duty cycle

KVA

8.5 Max.

@ No Load

KVA

0.15

Input Current 415V Supply
@ 100% duty cycle

Amps, Ac

18.9

@ 60% duty cycle

Amps, Ac

27.3

@ 35% duty cycle

Amps, Ac

36.2

@ No Load

Amps, Ac

0.3

Power Factor

0.99 Max.

Efficiency

%

>82

 

Output
Open Circuit Voltage @230V Input  Supply

Volts, DC

75V DC (+/-5V)

Welding Voltage Range

Volts, DC

14 – 34

Welding Current Range

Amps, DC

50 – 250

Crater Voltage Range

Volt, DC

14 – 34

Crater Current Range

Amps, DC

50 – 250

Welding Current (40°C 10 minutes  cycle)
@ 100% duty cycle

Amps, DC

160

@ 60% duty cycle

Amps, DC

195

@ 35% duty cycle

Amps, DC

250

General
Gas Preheater Rating

V / A

90 V DC / 1.1 Amps

Welding Wire Sizes (Diameter)

mm

0.8, 1.0, 1.2

Protections (Auto Reset)

Over Voltage, Under Voltage, Over Temperature, Output Short Circuit

Front Panel Functions

1.  2 Track/ 4 track control and Crater Setting

2.  Creep Feed

3.  Adjustable Burn-back

4.  Display – set Voltage and Wire Speed, actual Voltage

and Welding Current

5.  Pre flow and Post flow

6.  Wire Diameter Selection-

0.8, 1.0 & 1.2

7.  Shielding Gas Selection- Co2 And Mixed Arco2

Cooling

Type

Forced Air

Class of Insulation

H

Degree of Protection

IP23S

Dimensions (L x W x H) Power  Source

mm

600 x 330 x 530

Dimensions (L x W x H) With  Trolley

Kg

1040 x 475 x 1140

Weight (Approx. only Power Source)

Kg

32

Weight (Approx. Trolley)

Kg

77

 

 

FRONT CONTROL PANEL – OMNIMIG 250

 

 

 

TECHNICAL SPECIFICATIONS – BUILT-IN WIRE FEEDER

 

Wire Feeder (built – in)
Parameter

Unit

Value

Drive Unit

2 Roll PMDC Motor

Motor Voltage

Volt, Dc

42 V DC ± 0.5 V

Rated Power

Watts

90 W

End Connection For Torch

Euro Type

Suitable For Wire Sizes

mm

0.8, 1.0, 1.2

Wire Drive Motor.

Type

Permanent Magnet DC Type With Encoder Feedback

Rated Power

Watts

Wire Roll Drive

No

Four

Wire Feed Speed

Mtrs. / Min.

2-22 (For 0.8 mm Wire),

2-18 (For 1.0 mm Wire),

2-8 (For 1.2 mm Wire)

 

 

TECHNICAL SPECIFICATIONS – WELDING TORCH

 

Mig Welding Torch
Parameter

Unit

Value

Maximum Current @ 60% Duty Cycle

Amps

250 Amps With Co2 Gas, 200 Amps With Mixed Gas

Torch Cable Length

Meter

3

Torch Adapter

Type

Euro Type

Suitable For Wire Size Diameter

mm

0.8, 1.0, 1.2

Standard Accessories:

Gas Hose With Both Side End Connectors

2 Mtr.

 

 

 

  • Warranty : One year from the date of commissioning. ADOR WELDING LIMITED warrants that all new equipment sold from Plant/Area Offices / Authorised Distributors are free from defects in materials and workmanship and will perform in full accordance with applicable specifications.
  • In view of continuous development, ADOR WELDING LIMITED reserves the right to modify/change the design and /or the specifications without any prior notice.
  • Backed by dedicated customer care package.

 

 

 

Brands

ADOR

SKU: CHAMPMIG 250 Categories: , , Tags: , ,
×